Category: Uncategorized

Go Green With Tankless Water Heaters

Tankless water heaters can be extremely beneficial, allowing access to hot water when needed while also saving money on energy bills. However, homeowners may not know why they should consider installing one. This post will share signs that can indicate a water heater replacement is needed, as well as discuss how tankless water heaters work and the benefits they provide. 

Signs to Install a New Water Heater 

When water heaters fail, homeowners need to quickly schedule replacement services to avoid being left without hot water. Plumbers recommend watching for key symptoms and calling a professional when they are noticed. Some signs to watch for are:

• No hot water
• The water heater is leaking
• Visible corrosion
• Loud or strange noises
• Discoloration like cloudy or rust-colored water
• The water heater’s age
• Frequent repairs

How Tankless Water Heaters Work

A tankless water heater, often regarded as a demand-type water heater, operates without the use of a large storage tank. Unlike traditional storage water heaters that constantly heat and reheat water in a tank to keep it at a set temperature for when it is needed, a tankless system heats water only as it flows through the device, using less energy. 

When a hot water tap is turned on, cold water travels through a pipe and into the tankless water heater unit, where it is heated by either an electric element or a gas burner. This tankless water heating process ensures that hot water is available almost immediately and continues to flow as needed. This method not only reduces the energy wasted in heating a large tank of water continuously but also provides the convenience of an endless hot water supply, so hot water isn’t limited to how much a tank holds.

Benefits of a Tankless Water Heater Installation

Tankless hot water heaters provide numerous advantages for homeowners and households. They are more energy-efficient than traditional storage water heaters, using less energy and reducing utility bills. These tankless systems also take up less space, as they do not need to make room for a large storage tank and can be mounted on walls. This gives households more flexibility with where they are installed. 

Tankless water heaters also last longer than traditional storage water heaters. Tankless water heating systems can last over 20 years, whereas storage tank water heaters last around 10-15 years. Another significant advantage tankless water heaters offer for households is on-demand hot water, meaning hot water will be available when a family needs it. They don’t have to worry about running out, like when the hot water tank of a storage water heater runs out, and the household has to wait until it replenishes. 

About My Professional Plumber

My Professional Plumber is a family-owned and operated company serving Maryville and the surrounding areas. They provide upfront pricing, on-time service, and neat and clean service. Call them for tankless water heater installation and repair services in Maryville, TN. 

Protect Households by Quickly Repairing and Preventing Toilet Backups 

Backed-up toilets are not plumbing repairs homeowners want to take on themselves. They are caused by an underlying problem that needs to be identified and fixed. Backups can also quickly turn into messy situations that can cause water damage, foul odors, and health problems if they are not cleaned up and repaired quickly. This post can help homeowners successfully navigate and prevent toilet backups. It will explain issues that can cause backed-up toilets, how plumbers fix them, and how households can avoid them.

Common Causes of Toilet Backups

Numerous problems can cause toilet backups. A clogged sewer line is one of the most common problems that can lead to a backup. Sewer line clogs can be caused by many things, from food residue and things that shouldn’t have been flushed to tree roots or other obstructions.

Other problems plumbers will look for that can cause a backed-up toilet include sewer lines that are damaged, collapsed, or crushed. Broken sewer lines can occur due to issues like age and corrosion, invasive tree roots, or shifting soil. If homeowners notice toilet backups, they should quickly call a plumber to determine the reason for the backup and fix it. 

Professional Ways to Repair Backed-up Toilets

When plumbers arrive to repair backed-up toilets, they have numerous expert techniques available to fix them. They may first use sewer video inspection to look into the sewer line and accurately determine what caused the toilet to back up. This allows them to diagnose the problem more accurately and repair it correctly the first time. 

For clogs, plumbers can remove the blockages using an auger, drain snake, or hydro jetting. If there is damage to the sewer line that isn’t too severe, like tree roots that have infiltrated the pipe, they can use trenchless sewer repair methods, but if the line is too damaged or crushed, traditional sewer line repair methods may be used. 

Easy Ways for Homeowners to Avoid Toilet Backups

The easiest way for homeowners to handle toilet backups is to help avoid them in the first place. Households can follow some simple tips from plumbers to help prevent them. One of the easiest and most effective ways to prevent backed-up toilets is to avoid letting the wrong items go down the drains or get flushed down the toilets. 

Only toilet paper should be flushed down the toilet, and other items like paper towels, cotton balls, and feminine hygiene products should be thrown in the trash. Households should also avoid putting food scraps and grease down sink drains and can even install screens over the drains to collect hair and other debris before it goes down the drains. These tips will help prevent clogs, which is a common cause of backups. Root barriers can also be installed underground to help prevent tree roots from growing into the sewer line. 

About My Professional Plumber

My Professional Plumber has been serving Oak Ridge, TN, and the surrounding areas since 2010. They offer efficient, timely service, upfront pricing, and a satisfaction guarantee. Call them today for toilet repair services in Oak Ridge, TN. 

Tips to Help Keep Garbage Disposals Working Properly

When prepping for the holidays, the last thing homeowners want to deal with is a clogged or broken garbage disposal or a clogged drain or sewer line. Fortunately, there are things homeowners can do to help avoid problems with the garbage disposal, which can also help them avoid clogs.

Foods You Should Never Put Down the Garbage Disposal

Certain food items should never go down the garbage disposal, as they can cause problems for the disposal as well as clogs and blockages in the pipes. Grease, fats, and cooking oils should never go down the drain. These can easily cause blockages when they solidify. Instead, they should always be thrown away in the trash after cooling down.

Homeowners should also avoid putting things like stringy vegetables down the disposal, expandable foods like pasta and rice, hard items like bones and fruit pits, coffee grounds, and eggshells. When in doubt whether something can do down the disposal, it’s best to be cautious and throw it in the garbage to avoid problems. Another tip is to limit how much food is placed in the garbage disposal. Putting too much of any food down at once, even foods that can go into the disposal, can cause issues.

Run Cold Water When Using the Garbage Disposal

When using the garbage disposal, plumbers recommend that homeowners run cool water while using it and for at least 10 seconds after it’s off. Some of the advantages of running cold water while using the garbage disposal include:

• Keep food scraps flowing through the system to prevent clogs in the garbage disposal or pipes.
• Keep the motor cool and prevent it from overheating.
• Help grind down the food by adding water to the mixture.
• Prevent foul odors by preventing food from getting stuck in the garbage disposal.

In addition to running cool water, homeowners can also place ice cubes down the garbage disposal occasionally. Doing this can help dislodge food that has gotten stuck and sharpen the blades.

Have a Plumber Perform Garbage Disposal Services

When a garbage disposal unit malfunctions and homeowners notice warning signs of a faulty unit, such as their garbage disposal humming, leaking, or not working, they should resist the urge to try to make the repairs themselves and call professionals.

Occasionally, the garbage disposal reset button could help, but needing to use it or use it too often can also indicate a larger problem with the unit that needs attention. Plumbers have the expertise to safely repair and replace garbage disposals quickly. So whether homeowners need garbage disposal repair, a garbage disposal installation, or a garbage disposal replacement, call an expert to have it done right.

About My Professional Plumber

My Professional Plumber is a family-owned and operated company serving Maryville, TN, and the surrounding areas. They provide flat rate prices, on-time service, and a satisfaction guarantee. Call them today for kitchen plumbing and garbage disposal services in Maryville, TN.

Water heaters are a great convenience to have in your Lenoir City, TN home. As long as they work correctly, that is! Any homeowner who has ever had to book a water heater repair knows how expensive, time-consuming, and difficult it can be to fix a completely broken-down unit. You might regret calling the plumber after a breakdown, especially if they take a while to repair it, they can’t attend to your issue straightaway, or the repair charges are excessively high.

To help avoid the stress of a water heater malfunction that takes your hot water source offline for hours at a time, there are some key indicators to look out for. Precautionary maintenance is your best friend when it comes to avoiding costly breakdowns!

Improper use can result in you needing a water heater repair service to address the failure of the internal mechanisms. No matter how high-quality the water heater is, or what reputable brand you purchased it from, it is important to use the product correctly and maintain it effectively. In order to avoid the premature failure of your investment and potential loss, these 7 indicators will help you determine if you need to request the attention of a professional plumber.

1. There’s an Old Tank

A water heater that is older than its intended life span of 10 years can experience issues, such as water leaks, that are unfixable. Water heaters are built to last for a decade or more, but the older they get the more likely it is you’ll need a water heater repair service.

If you know the age of your water heater and it is approaching the end of its lifespan, it’s worth having a professional investigate its true condition and advise whether it’s time to upgrade. Failure to replace a water heater at a suitable time once it ages can result in flooding, energy efficiency loss, and higher energy bills. All of which can be avoided with a replacement at the appropriate time.

Thanks to advancements in modern plumbing techniques, you can extend the lifespan of your heater through timely water heater repair and maintenance services. You could also improve your home’s efficiency by upgrading to a modern unit.

2. There’s a Broken Drain Valve

A loose drain valve is a common cause of leaks from water heaters. Water can leak through the hinges if the valve is not fitted correctly. The best way to resolve the problem is to tighten it with a wrench. However, it’s imperative that it is not over-tightened as this can cause damage to the water supply. A professional plumber in Lenoir City, TN can investigate the leak and tighten, repair or replace the drain valve during a water heater repair service.

3. You’ve Noticed Pressure Issues

Another reason for the leak you see coming from your water heater is the pressure in its tank is incorrect. The tank must find a way to relieve the pressure, and this often results in leaks.

All water heaters come with a pressure and temperature release (TPR) valve. The valve regulates the pressure released by the water heater. A fault in the valve can result in less control over the heater’s pressure. However, this isn’t the only cause of pressure issues. Accumulation of sediments in the tank can lower water pressure and so can pipe blockages.

4. There’s Noticeable Rust

During a plumbing inspection service, it is our duty to tell you if your hot water heater is exhibiting severe signs of rust or corrosion. Typically, the bottom of the tank will corrode first and a water leak from the bottom of the tank is a common reason that people call for a water heater repair service.

Most often, this corrosion is caused by the sediment that has settled at the bottom of your tank. Annual tank flushing can shift this sediment out of your plumbing system and prevent it from causing major issues. To remove sediment from your water heater tank, make it a habit to flush it every six months, or at least once per year. A tank with noticeable rust caused by sediment buildup may require an imminent replacement, so it’s important to schedule an inspection.

5. A Leaking Water Supply Line

Although most water heater leaks appear to be coming from the heater, it is important to determine and fix the source of the problem through a professional water heater repair service.

The plumbing that transports water from the water supply line to the heater is located above the heaters, and may be the cause of excess water. It could be the pipe itself or down to a faulty cold water connection, valve, or other component.

6. Odd, Unexpected Loud Noises

While most water heaters aren’t silent during operation, don’t ignore a water heater that becomes unexpectedly loud. Too much sediment buildup can cause a water heater tank to bang and pop. Mini-explosions can occur when sediment builds up and reacts with the heating element. Thankfully, this sounds worse than it is! Draining the water heater to remove sediment from the tank is the best way to fix an obnoxiously noisy heater during a water heater repair service.

A water hammer is another possible cause of a loud hot water heater. A water hammer occurs when your water supply has been shut-off a while and re-opened without adequate pressure adjustment. The subsequent high-pressure release of water that floods your home’s pipes can hammer your system once the valve re-opens. A plumber is best placed to adjust the pressure valve and correctly drain the system when this occurs, to prevent widespread damage.

If you notice any of the above indicators in relation to the water heater installed in your Lenoir City, TN home, then call My Professional Plumber. We will help you make an informed choice about whether you need a water heater repair or replacement service. Our trusted, certified, honest and reliable plumbers are here for you!

Photo By Alluvion Stock at Shutterstock

Water heaters are a great convenience to have in your Lenoir City, TN home. As long as they work correctly, that is! Any homeowner who has ever had to book a water heater repair knows how expensive, time-consuming, and difficult it can be to fix a completely broken-down unit. You might regret calling the plumber after a breakdown, especially if they take a while to repair it, they can’t attend to your issue straightaway, or the repair charges are excessively high.

To help avoid the stress of a water heater malfunction that takes your hot water source offline for hours at a time, there are some key indicators to look out for. Precautionary maintenance is your best friend when it comes to avoiding costly breakdowns!

Improper use can result in you needing a water heater repair service to address the failure of the internal mechanisms. No matter how high-quality the water heater is, or what reputable brand you purchased it from, it is important to use the product correctly and maintain it effectively. In order to avoid the premature failure of your investment and potential loss, these 7 indicators will help you determine if you need to request the attention of a professional plumber.

1. There’s an Old Tank

A water heater that is older than its intended life span of 10 years can experience issues, such as water leaks, that are unfixable. Water heaters are built to last for a decade or more, but the older they get the more likely it is you’ll need a water heater repair service.

If you know the age of your water heater and it is approaching the end of its lifespan, it’s worth having a professional investigate its true condition and advise whether it’s time to upgrade. Failure to replace a water heater at a suitable time once it ages can result in flooding, energy efficiency loss, and higher energy bills. All of which can be avoided with a replacement at the appropriate time.

Thanks to advancements in modern plumbing techniques, you can extend the lifespan of your heater through timely water heater repair and maintenance services. You could also improve your home’s efficiency by upgrading to a modern unit.

2. There’s a Broken Drain Valve

A loose drain valve is a common cause of leaks from water heaters. Water can leak through the hinges if the valve is not fitted correctly. The best way to resolve the problem is to tighten it with a wrench. However, it’s imperative that it is not over-tightened as this can cause damage to the water supply. A professional plumber in Lenoir City, TN can investigate the leak and tighten, repair or replace the drain valve during a water heater repair service.

3. You’ve Noticed Pressure Issues

Another reason for the leak you see coming from your water heater is the pressure in its tank is incorrect. The tank must find a way to relieve the pressure, and this often results in leaks.

All water heaters come with a pressure and temperature release (TPR) valve. The valve regulates the pressure released by the water heater. A fault in the valve can result in less control over the heater’s pressure. However, this isn’t the only cause of pressure issues. Accumulation of sediments in the tank can lower water pressure and so can pipe blockages.

4. There’s Noticeable Rust

During a plumbing inspection service, it is our duty to tell you if your hot water heater is exhibiting severe signs of rust or corrosion. Typically, the bottom of the tank will corrode first and a water leak from the bottom of the tank is a common reason that people call for a water heater repair service.

Most often, this corrosion is caused by the sediment that has settled at the bottom of your tank. Annual tank flushing can shift this sediment out of your plumbing system and prevent it from causing major issues. To remove sediment from your water heater tank, make it a habit to flush it every six months, or at least once per year. A tank with noticeable rust caused by sediment buildup may require an imminent replacement, so it’s important to schedule an inspection.

5. A Leaking Water Supply Line

Although most water heater leaks appear to be coming from the heater, it is important to determine and fix the source of the problem through a professional water heater repair service.

The plumbing that transports water from the water supply line to the heater is located above the heaters, and may be the cause of excess water. It could be the pipe itself or down to a faulty cold water connection, valve, or other component.

6. Odd, Unexpected Loud Noises

While most water heaters aren’t silent during operation, don’t ignore a water heater that becomes unexpectedly loud. Too much sediment buildup can cause a water heater tank to bang and pop. Mini-explosions can occur when sediment builds up and reacts with the heating element. Thankfully, this sounds worse than it is! Draining the water heater to remove sediment from the tank is the best way to fix an obnoxiously noisy heater during a water heater repair service.

A water hammer is another possible cause of a loud hot water heater. A water hammer occurs when your water supply has been shut-off a while and re-opened without adequate pressure adjustment. The subsequent high-pressure release of water that floods your home’s pipes can hammer your system once the valve re-opens. A plumber is best placed to adjust the pressure valve and correctly drain the system when this occurs, to prevent widespread damage.

If you notice any of the above indicators in relation to the water heater installed in your Lenoir City, TN home, then call My Professional Plumber. We will help you make an informed choice about whether you need a water heater repair or replacement service. Our trusted, certified, honest and reliable plumbers are here for you!

Photo By Alluvion Stock at Shutterstock

A boiler is a key essential in a home’s heating system. Boilers are designed with features that assist them in performing effectively and efficiently. But just like any other device, they need preventive maintenance to help them run more smoothly.

If you have a boiler, you know how crucial it is to ensure it is in good working condition. Boilers are susceptible to malfunctions. This blog focuses on the common signs to look out for that show your boiler may need repairs. You don’t want boiler problems in the middle of a frigid winter.

Strange Sounds

Typically, a boiler is usually pretty quiet. But if you hear weird noises from your boiler, it could indicate an underlying problem with your unit. For instance, if you hear chunking, wiring, and banging sounds coming from your heater, this is a sign that your fan or pump may be worn out and requires replacement.

Meanwhile, if the pressure in your water heater is low or your boiler is kettling, you may hear whistling or gurgling sounds. Sometimes when your boiler is filled with minerals from the hard water coming into the heater, it can lower pressure in the boiler.

Not only does this leave it producing kettling sounds, but it also causes the tank to leak eventually. If you hear any sounds from your boiler, contact a plumbing company to check the issue.

Higher Heating Bills

If you have recently noticed any sudden and unexplainable increase in your energy bills, your boiler may be the issue. Various issues may force your boiler to perform harder to provide heat. For instance, the problem may be that your boiler is leaking and needs repairs.

However, in cases where your boiler is over 15 years old, you should seek a plumbing company’s help to replace it with a more energy-efficient model.

Leaks

Another significant sign to look for in a faulty boiler is leaking. You should be concerned if you notice water around the boiler. This could mean that you have a leaking boiler. Water should always stay on your boiler since it’s built as a closed-loop system.

If it leaks, your boiler seal may be broken or corroded. If not repaired, water leaks can be a nightmare. They cause mold and mildew growth that can cause property damage.

Also, water damage statistics indicate that even the most minor leak can cause water bills in average household water bills to shoot up by 10 percent. A technician from a reputable plumbing company in Lenoir City, TN can seal the leaks if they fix the leakage problems.

Foul Smell

Carbon monoxide (CO) is produced in the boiler when fuel is not completely burnt due to a lack of oxygen. Usually, the boiler releases carbon monoxide out of your home through the flue, but sometimes some could leak into your house.

Carbon monoxide is a very poisonous gas, and approximately 430 people in the United States die from CO poisoning, and around 50,000 visits the emergency department. One way you can tell a carbon monoxide leak is through a faint lousy odor in your home.

If your boiler is leaking carbon monoxide, it will also produce a yellow flame instead of the normal blue one. Also, black stains on your boiler may indicate a carbon monoxide leak. Low carbon monoxide levels also cause headaches, nausea, and dizziness.

Homeowners in Lenoir City, TN should look out for any of the above signs. If you note any, immediately turn off the boiler, evacuate everyone from the building, and immediately contact your local plumbing company to resolve the problem swiftly.

Lack of Heat

One of the most common signs of faulty boilers is a lack of heat. Contact a plumbing company to diagnose the problem and fix the problem on time.

Lack of Hot Water

Usually, the function of a boiler is to heat water, but if it’s not performing this task and you can’t get the water in your home to stay hot, you need to seek professional services. You should contact a professional from a plumbing company to check the parts not working correctly and replace any broken parts.

Sometimes, the water may come out way cold or hotter than it should be. In such scenarios, the boiler’s circulation could be the problem, and a plumber can help fix the issue.

Cold Building

Homeowners who have had their boilers for a while are probably familiar with how long the boilers take to heat their homes. If your boiler takes way more time to heat a room than usual, it could be a circulation problem.

Sometimes the house may even remain cold even after you have turned up the heater; this can be very irritating during cold winters.

Seek help from a plumbing company in Lenoir City, TN to help you get to the root of the problem and fix it immediately. However, if your boiler is old, maybe over 15 years old, you should replace it with a new one.

Faulty Boilers

Most boilers are designed with a temperature sensor that triggers your boiler to shut down before it reaches the critical point. If you have recently experienced your boiler turning itself off, chances are that it’s faulty.

The boiler switches off so it cannot overheat and melt down the internal components. This problem may result from a damaged heat exchanger, thermostat issues, or malfunctioning pumps. Whatever the case, it is wise to seek professional help from an expert from a reputable plumbing company.

Contact My Professional Plumber for Reliable Boiler Repair Services!

In case your boiler has been giving you trouble, it is time you have it repaired. Contact us at My Professional Plumber for top-notch plumbing repairs. We are a plumbing company with a team of competent and experienced technicians who provide water purification systems, plumbing installations, garbage disposal replacement, drain cleaning, and water heater repair services. Dial our number right away!

Photo By Ruslan Ivantsov at Shutterstock

A boiler is a key essential in a home’s heating system. Boilers are designed with features that assist them in performing effectively and efficiently. But just like any other device, they need preventive maintenance to help them run more smoothly.

If you have a boiler, you know how crucial it is to ensure it is in good working condition. Boilers are susceptible to malfunctions. This blog focuses on the common signs to look out for that show your boiler may need repairs. You don’t want boiler problems in the middle of a frigid winter.

Strange Sounds

Typically, a boiler is usually pretty quiet. But if you hear weird noises from your boiler, it could indicate an underlying problem with your unit. For instance, if you hear chunking, wiring, and banging sounds coming from your heater, this is a sign that your fan or pump may be worn out and requires replacement.

Meanwhile, if the pressure in your water heater is low or your boiler is kettling, you may hear whistling or gurgling sounds. Sometimes when your boiler is filled with minerals from the hard water coming into the heater, it can lower pressure in the boiler.

Not only does this leave it producing kettling sounds, but it also causes the tank to leak eventually. If you hear any sounds from your boiler, contact a plumbing company to check the issue.

Higher Heating Bills

If you have recently noticed any sudden and unexplainable increase in your energy bills, your boiler may be the issue. Various issues may force your boiler to perform harder to provide heat. For instance, the problem may be that your boiler is leaking and needs repairs.

However, in cases where your boiler is over 15 years old, you should seek a plumbing company’s help to replace it with a more energy-efficient model.

Leaks

Another significant sign to look for in a faulty boiler is leaking. You should be concerned if you notice water around the boiler. This could mean that you have a leaking boiler. Water should always stay on your boiler since it’s built as a closed-loop system.

If it leaks, your boiler seal may be broken or corroded. If not repaired, water leaks can be a nightmare. They cause mold and mildew growth that can cause property damage.

Also, water damage statistics indicate that even the most minor leak can cause water bills in average household water bills to shoot up by 10 percent. A technician from a reputable plumbing company in Lenoir City, TN can seal the leaks if they fix the leakage problems.

Foul Smell

Carbon monoxide (CO) is produced in the boiler when fuel is not completely burnt due to a lack of oxygen. Usually, the boiler releases carbon monoxide out of your home through the flue, but sometimes some could leak into your house.

Carbon monoxide is a very poisonous gas, and approximately 430 people in the United States die from CO poisoning, and around 50,000 visits the emergency department. One way you can tell a carbon monoxide leak is through a faint lousy odor in your home.

If your boiler is leaking carbon monoxide, it will also produce a yellow flame instead of the normal blue one. Also, black stains on your boiler may indicate a carbon monoxide leak. Low carbon monoxide levels also cause headaches, nausea, and dizziness.

Homeowners in Lenoir City, TN should look out for any of the above signs. If you note any, immediately turn off the boiler, evacuate everyone from the building, and immediately contact your local plumbing company to resolve the problem swiftly.

Lack of Heat

One of the most common signs of faulty boilers is a lack of heat. Contact a plumbing company to diagnose the problem and fix the problem on time.

Lack of Hot Water

Usually, the function of a boiler is to heat water, but if it’s not performing this task and you can’t get the water in your home to stay hot, you need to seek professional services. You should contact a professional from a plumbing company to check the parts not working correctly and replace any broken parts.

Sometimes, the water may come out way cold or hotter than it should be. In such scenarios, the boiler’s circulation could be the problem, and a plumber can help fix the issue.

Cold Building

Homeowners who have had their boilers for a while are probably familiar with how long the boilers take to heat their homes. If your boiler takes way more time to heat a room than usual, it could be a circulation problem.

Sometimes the house may even remain cold even after you have turned up the heater; this can be very irritating during cold winters.

Seek help from a plumbing company in Lenoir City, TN to help you get to the root of the problem and fix it immediately. However, if your boiler is old, maybe over 15 years old, you should replace it with a new one.

Faulty Boilers

Most boilers are designed with a temperature sensor that triggers your boiler to shut down before it reaches the critical point. If you have recently experienced your boiler turning itself off, chances are that it’s faulty.

The boiler switches off so it cannot overheat and melt down the internal components. This problem may result from a damaged heat exchanger, thermostat issues, or malfunctioning pumps. Whatever the case, it is wise to seek professional help from an expert from a reputable plumbing company.

Contact My Professional Plumber for Reliable Boiler Repair Services!

In case your boiler has been giving you trouble, it is time you have it repaired. Contact us at My Professional Plumber for top-notch plumbing repairs. We are a plumbing company with a team of competent and experienced technicians who provide water purification systems, plumbing installations, garbage disposal replacement, drain cleaning, and water heater repair services. Dial our number right away!

Photo By Ruslan Ivantsov at Shutterstock

You rely on your plumbing system all day, so when something goes wrong, life in your home can be inconvenient, and daily household tasks can be challenging or impossible.

Many people will attempt a DIY repair to avoid hiring a plumber, but it’s not a good idea. If you make a mistake trying to fix a problem, you could do further damage, and you’ll need to pay a plumber a lot more than if you had called a plumber in the first place. Plumbers undergo years of training and apprenticeship to learn their craft, and if you don’t have the necessary training, it’s best to leave the job to a professional.

If your plumbing system experiences any of the following problems, an internet search for a plumber near me in Knoxville, TN, is necessary.

#1 Drain Issues

When you run the water in your home, it should flow freely down the drain. If the water drains slowly or doesn’t drain at all, a Google search for a plumber near me in Knox Country should be your next step. You may be tempted to use a liquid drain cleaner to remove the clog, but these products contain harsh chemicals that could damage the pipes. Also, there’s no guarantee the drain cleaner will remove the entire clog, and if part of it remains in the lines, it won’t be long before you deal with another drain issue.

A Google search for a plumber near me in Knoxville, TN, will help you find a plumber qualified to handle the problem. A plumber will use one of a few available methods to remove the clog safely, and you can be sure the entire clog was removed.

#2 Water Heater Issues

Your water heater is an appliance and an essential part of your plumbing system. The cold water coming into the home fills the water tank, where it’s heated, stored, and available when needed. Like every appliance in your home, problems can occur with the unit, affecting the water temperature or your ability to use the hot water.

If your water heater experiences any of the following problems, an internet search for a plumber near me in Knoxville, TN, will help you find a qualified plumber.

• You have no hot water.
• The water doesn’t get hotter than lukewarm.
• You run out of hot water frequently.
• The unit makes a banging or popping sound.
• Brown or rust-colored hot water
• Poor hot water pressure
• Moisture or water pooling around the unit

A plumber can inspect the unit to find the cause of the problem and determine if the issue can be fixed or if replacing the unit is the best solution. It’s best to hire a plumber right away to prevent the problem from escalating to something more serious that will be more expensive to repair.

#3 Dripping Faucet

A dripping faucet is a minor nuisance to many people, but it’s a bigger problem than you think. A faucet that drips one drop per second can waste up to 11 gallons of water per day and 330 gallons per month, causing a significant increase in your water bills. In addition, wasting water harms the environment, so a Google search for a plumber near me in Knox County is necessary.

A few problems can cause a faucet to drip, including:

• A worn-out washer or gasket
• Loose O ring
• Corroded valve seat
• The faucet has reached the end of its lifespan

You’ll need a plumber to inspect the faucet to determine the best way to resolve the problem. If you try to ignore the problem, it can escalate from a drip to a steady stream, so it’s best to make the call immediately.

#4 Running Toilet

If you think a dripping faucet wastes a lot of water, you’ll be shocked by the water wasted by a running toilet. In one day, a running toilet wastes 30 gallons of water, and 900 gallons over a month, causing your water bill to increase considerably. A Google search for a plumber near me in Knox County will help you find a qualified plumber.

Your toilet is designed to run right after a flush to prepare the toilet for the next flush. A few issues can cause the toilet to run continuously, including:

• Cracked or broken flapper
• Broken flapper chain
• The float height is too high or low
• The refill hose is too long
• The toilet has reached the end of its lifespan

A Google search for a plumber near me in Knox County will help you find a qualified plumber to resolve the problem, and the cost of your water bills will go down.

#5 Clogged Toilet

There’s a good chance you’ve dealt with a toilet clog at least once in your life, and most clogs can be broken up enough with a plunger to flush the toilet without overflowing all over the floor. However, if the clog is too large, solid, or located too far down the drain pipe for the plunger to be effective, an internet search for a plumber near me in Knox County will help you find a licensed plumber to remove the clog.

Toilet clogs that can’t be removed with a plunger occur when something is flushed that isn’t designed to be, such as baby wipes, paper towels, and menstrual products. A plumber has the tools necessary to remove the clog, allowing you to flush the toilet safely. You can’t use the toilet until the clog is removed, which can be inconvenient, especially if you only have one bathroom, so it’s best to make the call as soon as the toilet clogs.

Call My Professional Plumber Today

If there’s a problem with your plumbing system, don’t waste your time on a Google search for a plumber near me in Knox County, and call My Professional Plumber instead. We’re a full-service plumbing company, providing excellent customer service for years.

Our plumbers are professionally trained, licensed, and have the knowledge and skills to tackle the toughest jobs in the industry. You will receive a quote before the work starts to ensure the repair fits within your budget. If you have an issue that must be addressed immediately, we provide emergency service 24 hours a day, 365 days a year.

To schedule an appointment for plumbing service, give My Professional Plumber a call today.

Photo By Andrey Deryabin at istock

Repiping your Knoxville, TN, home is a necessary step in many situations. If your home was built in the 60s or 70s, and the pipework hasn’t been replaced by your plumbing company yet, you will likely need a new plumbing system soon.

A plumbing inspection from your local, trusted plumbing company will identify problem areas and indicate whether it’s the right time to upgrade. If it’s time to upgrade, you might see:

1. Discolored water from rusty pipes. If your water turns yellow or brown, this is a sign that your pipes are rusty. If you notice the water becoming discolored, it’s a sign that your pipes are rusty or moldy. You should stop drinking and bathing in the water immediately. If it affects a widespread area, such as multiple fixtures, then it’s time to ask your plumbing company about repiping the whole house.
2. Inconsistent, low water pressure from misshapen pipes. Broken or damaged pipes are another sign that it is time to repipe your house. These problems can cause extreme pressure swings or a gradual decrease in water pressure. This is not only inconvenient but also means there is the likelihood of rust and mold.
3. Strange-tasting water. Water contaminated with minerals or rust can alter the taste of your water. Any change in taste is an indication that it’s time for you to repipe your home. You should stop drinking tap water until your pipes are inspected by a plumbing company, and they confirm that it’s safe to use.
4. Frequent leaks and clogs. While a few leaks and clogs are normal, if you notice your pipes leaking or backing up frequently, this is a sign of damaged pipe. Replumbing your home is the only way to stop frequent clogging or leaking.
5. Mold growth on water and sewer lines. Even if there are no water quality or pressure issues, you should be wary of mold growth near pipes. Even pinhole leaks can lead to mold growth in dry areas, without affecting water pressure. Although small leaks can be repaired with minor plumbing repairs, larger leaks may require repiping.

These problems are not only inconvenient, they pose a risk to the safety and health of everyone in your Knoxville, TN, home. Our team can help you schedule a repiping appointment quickly. Even if you’re hesitant about repiping, you should schedule an inspection with your plumbing company, so they can confirm if it’s necessary. Issues that require repiping are severe and can cause lasting, major damage if left unchecked.

What Is the Repiping Process?

Don’t worry if you have to have your whole-home plumbing or repiping done. You might think that repiping can cause major damage to your home and create a mess. However, this is not true. The process takes between 2 and 4 days in most cases. Here’s a general overview of how your plumbing company will handle the repiping process:

Preparation to Repipe

Once it has been decided that repiping is the best option for your home, the plumber will determine where to begin. They can usually work on a room by room basis, so you don’t have to completely vacate the property and you can still use other areas of your home. It is recommended that you cover any furniture and belongings that are not in use before the work starts.

Installation of New Pipes

This part can be fairly straightforward, but it depends on your home’s age and whether there is easy access to the existing pipes. The plumber should inform you if anything untoward happens during the installation, so that you can take appropriate action. The plumber should not shut off water for more than 24 hours, and most likely the main water supply will only be closed off during active repairs. Your plumbing company will typically use copper, PEX, or CPVC plastic replacement pipes. These materials are more resistant to corrosion and damage.

After Repiping

After the plumber has completed installing the pipes, they will test everything to make sure it is all working properly. A reputable plumber will clean up the mess and make sure that customers are satisfied. You should be able to see the following after a complete rework of your home’s plumbing:

Better Water Pressure

A rise in water pressure is one of the first signs you will notice after your plumbing has been replaced. Older pipes are more susceptible to internal corrosion and buildup of contaminant residue. These accumulations can cause a decrease in the pressure of your home’s water supply over time. Older pipes are also prone to small leaks that can reduce the water pressure. A whole-home repiping will solve all the issues you have with your plumbing system. This will allow you to enjoy better water pressure in your shower, faucets, and appliances.

Leak Prevention

Old plumbing can lead to unanticipated leaks. These incidents, whether they are small or major, can cause pipe failures that are very costly for homeowners. The risk of serious water damage is high. You can be confident that your pipes are in good condition after a whole-house renovation, and you won’t see a leak again for a while, if you work with a trusted, licensed, and experienced plumbing company.

Improved Health & Safety

Older pipes can become corroded and rusty, which can then affect the water supply to your appliances, faucets, and shower. Rust and other elements can pose a danger to your health and safety as well as that of your family members. You can eliminate the risk of rust and other pollutants in plumbing systems by having your home repiped.

Added Home Value

A whole-home repiping project will improve the home’s value, as with all home improvements. If you are thinking of selling your home, this is especially important. Potential buyers are more interested in homes that have new plumbing systems.

Although it might seem daunting, a plumbing company will offer a whole-home repiping when it’s necessary. Contact My Professional Plumber to find out more about whether your Knoxville, TN, home is in need of this service!

Photo By Vladimir Borozenets at Shutterstock